For iPP 320/350 use the and keys to navigate and select.For iSC 250/480 use the and keys to navigate and select.Scroll to the TDA Menu and select this:.If your device is requesting to press (F) for Menu but your unit doesn't have a function key simply press ( ) Plus instead.Shortly after this, the device will ask you to either press ( ) Plus or (F) Function for menu. When on the Ingenico Copyright screen press 2, 6, 3, 4, and Enter.If the device is configured properly, you only need to assign a unique network IP address to the device, continue to Configuring IP Address Only.Re-configuring for Ethernet: Server: Static: If the device shows anything other than the message above on the HOST line, you will need to reconfigure the device for the proper settings.This detail should show as “ HOST: Ethernet: Server: Static:” If you are using a device with a black and white screen you will need to scroll down to view this detail. Press and Hold the Clear (Yellow) and the Period (.) keys until the device chirps. Press and Hold the Clear (Yellow) and the Minus (-) keys until the device chirps. The current device configuration can be validated during the device reboot process on the Ingenico Copyright screen. You will need to validate that the device(s) are configured to the desired communication method of Ethernet. Modern devices come pre-configured from the key injection facility. The file will begin to backup the database, this is complete when the line of "Rotating Micros backup files complete." appears on the text field above these options.Ĭlosing this screen without seeing the "Rotating Micros backup files complete message " will stop the backup process.Once the above is configured select Run Backup at the bottom left.On this screen select " Backup Database" on the right side and ensure the following:.If the options on the screen when logged in are greyed out, then another user with higher privileges will be needed.The MICROS user will need to log into their MICROS Database Administrator at this time.This can also be searched using the keyword of "Database" within windows search.You can also locate this in the install directory of.On the MICROS server navigate to Start > MICROS Applications > Utilities > Database > MICROS Database Manager.\micros\database\data\backup\MICROS_ year_ month_ day_ hour_ minutes.mbz5 You can validate the date and time of the last backup in. This operation should only be performed if a scheduled backup has not occurred within the last 24 hours. If any of the required licenses are not valid then the merchant will need to obtain a valid license before installing the Shift4 Bridge.īacking Up the MICROS RES 3700 Database It is recommended that before any changes are made that a backup of the MICROS Database is created. You can re-verify this by double-clicking on the license in question to trigger a status check. The license will have a red 'x’ or a green checkmark next to it, which identifies if a license is present. There are two licenses that are required, the PMS/SIM and Transaction Services.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |